Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 196 / 490

CAUTION
l Do not leave the key in the “ON” position
for a long time when the engine is not run-
ning, doing so will cause the battery to be
discharged.
l Do not turn the key to the “START” position
while the engine is running. Doing so could
damage the starter motor.
Engine switch*
E00631801154
In order to prevent theft, the engine will not
start unless a preregistered keyless operation
key is used. (Engine immobilizer function)
If you are carrying the keyless operation key,
you can start the engine.
CAUTION
l The indication lamp (A) will flash orange
when there is a problem or malfunction in
the keyless operation system. Never drive if
the indication lamp on the engine switch is
flashing orange. Immediately contact a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
l If the engine switch operation is not smooth
and feels like it is sticking, do not operate
the
switch. Immediately contact a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
NOTE
l When operating the engine switch, press the
switch all the way in. If the switch is not
fully pressed, the engine may not start or the
operation mode may not change. If the en-
gine switch is pressed correctly, there is no
need to hold the engine switch down.
l When the battery in the keyless operation
key has worn out, or the keyless operation
key is out of the vehicle, a warning lamp
will blink for 5 seconds or a warning display
will appear.
NOTE
Warning lamp (mono-colour liquid crystal
display)
Warning display (colour liquid crystal dis-
play)
Operation mode of the engine
switch and its function
OFF
The indication lamp on the engine switch
turns off.
The operation mode cannot be put in OFF
when the selector lever is in any position oth-
er than the “P” (PARK) position (A/T, CVT).
ACC
Electrical devices such as the audio and ac-
cessory socket can be operated.
Engine switch*
6-14
OGFE16E1
Starting and driving
6