Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 171 / 490

7 - person seat
Vehicle condition Switch posi-
tion
“0”
“0”
“1”
“2”
“3”
“3” or “4”
●:1 person
:Full luggage loading
Switch position
0- Driver only/Driver + 1
front passenger
Switch position
1- 1 front passenger
+ 2 passengers on third
seat
Switch position
2- 7 passengers (including
driver)
Switch position
3- 7 passengers (including
driver) + Full luggage
loading /
Driver + Full luggage
loading {Except for 2WD
vehicles equipped with
CVT}
Switch position
4- Driver + Full luggage
loading {2WD vehicles
equipped with CVT}
Automatic headlamp levelling
(vehicles with LED headlamps)
E00517601610
This mechanism automatically adjusts the di-
rection of the headlamps (beam position) de-
pending on changes in the condition of the
vehicle, such as the number of occupants or
luggage weight. When the headlamps are il-
luminated with the ignition switch or the op-
eration mode in ON, the beam position of the
headlamps is automatically adjusted when the
vehicle is stopped.
Turn-signal lever
E00506501491
1- Turn-signals
When making a normal turn, use posi-
tion (1). The lever will return automati-
cally when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to
change a lane, the turn-signal lamps and
indication lamp in the instrument cluster
will only flash while the lever is operat-
ed.
Also, when you move the lever to (2)
slightly then release it, the turn-signal
lamps and indication lamp in the instru-
ment cluster will flash 3 times.
Turn-signal lever
5-61
OGFE16E1
Instruments and controls
5