Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 165 / 490

Combination headlamps
and dipper switch
E00506003878
Headlamps
NOTE
l When entering a country in which vehicles
are driven on the opposite side of the road to
the country in which your vehicles is sup-
plied, necessary measures have to be taken
to avoid dazzling oncoming traffic. Howev-
er, headlamps on this vehicle do not need
any adjustment.
l Do not leave the lights on for a long time
while the engine is stationary (not running).
A run-down battery could result.
l
When it rains, or when the vehicle has been
washed, the inside of the lens sometimes be-
comes foggy, but this does not indicate a
functional problem.
When the lamp is switched on, the heat will
remove the fog. However, if water gathers
inside the lamp, we recommend you to have
it checked.
Type 1
Rotate the switch to turn on the lamps.
OFF
All lamps off {except daytime run-
ning lamps}
Position, tail, licence plate, instru-
ment panel lamps and downlight on
Headlamps and other lamps go on
Type 2
Rotate the switch to turn on the lamps.
OFF
All lamps off {except daytime run-
ning lamps}
AUTO
With the ignition switch or the oper-
ation mode is in ON, headlamps, po-
sition, tail, licence plate, instrument
panel lamps and downlight turn on
and off automatically in accordance
with outside light level. {Daytime
running lamps will be turned on
while the tail lamps are off.} All
lamps turn off automatically when
the ignition switch is turned to
“OFF” position or the operation
mode is put in OFF.
Position, tail, licence plate, instru-
ment panel lamps and downlight on
Combination headlamps and dipper switch
5-55
OGFE16E1
Instruments and controls
5