Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 159 / 490

Position lamp indication lamp
E00508900173
This indication lamp illumi-
nates while the position
lamps are on.
Low coolant temperature indi-
cation lamp - blue (Vehicle
equipped with the multi infor-
mation display - Type 2)
E00502200057
This indication lamp illumi-
nates in blue when the cool-
ant temperature is low.
NOTE
l When the indication lamp goes out, this
should be used as a rough indication of when
the heating starts working.
ECO Drive Assist*
E00531701093
This function displays how fuel-efficiently
you are driving under different driving condi-
tions.
The ECO drive assist display will change as
follows if you do fuel-efficient driving using
the accelerator in a way well matched with
the vehicle speed.
Low High
ECO drive level
NOTE
l
On vehicles with A/T or CVT, the ECO
drive assist is displayed only when vehicle is
driven with the selector lever in the “D”
(DRIVE) position or when vehicle is driven
in the sport mode (for vehicles equipped
with shift paddles).
Diesel preheat indication lamp
(diesel-powered vehicles)
E00502300247
This indicates the glow plug
preheat condition.
[Except for vehicles equip-
ped with keyless operation
system]
When the ignition switch is
turned to the “ON” position, the lamp illumi-
nates. As the glow plug becomes hot, the
lamp goes out and the engine can be started.
[For vehicles equipped with keyless opera-
tion system]
When the operation mode is put in ON, the
lamp illuminates and preheating of the glow
lamp starts automatically. As the glow plug
becomes hot, the lamp goes out and the en-
gine starts.
NOTE
l If the engine is cold, the diesel preheat indi-
cation lamp is on for a longer time.
l When the engine is warm, the diesel preheat
indication lamp does not come on even if the
ignition switch is turned to the “ON” posi-
tion or the operation mode is put in ON.
Indication lamps
5-49
OGFE16E1
Instruments and controls
5