Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 730 / 1164

PARKING BRAKES -
Parking Brake Drum
36-8
PARKING BRAKE DRUM
36100250161
REMOVAL AND INSTALLATION
Caution
For 2WD-vehicles with ABS, care must be taken not to scratch or damage the teeth of the ABS
rotor. The ABS rotor must never be dropped. If the teeth of the ABS rotor are chipped, resulting
in a deformation of the ABS rotor, it will not be able to accurately detect the wheel rotation speed,
and the system will not function normally.
Pre-removal Operation
Drive Shaft Removal <4WD>
(Refer to GROUP 27B.)
Post-installation Operation
D Drive Shaft Installation <4WD>
(Refer to GROUP 27B.)
D Parking Brake Lever Stroke Check and Adjustment
(Refer to P.36-3.)
55 - 65 Nm
Brake grease: Multipurpose grease
13
12 10
12
16
8
5
9
2
14
4
3
6
15
11
12
16
6
10
9
12
55 - 65 Nm
1
7
Removal steps
1. Rear speed sensor
<2WD - Vehicles with ABS>
(Refer to GROUP 35B.)
2. Rear brake caliper
(Refer to P.36-8)
3. Rear brake disc
4. Shoe-to-anchor spring
(Refer to P.36-8)
5. Adjusting screw spring
6. Adjuster (Refer to P.36-8)
7. Strut
8. Strut return spring
9. Shoe hold-down cup
(Refer to P.36-8)
10. Shoe hold-down spring
11. Shoe hold-down pin
12. Shoe and lining assembly
13. Clip
14. Parking brake cable
15. Rear hub assembly
(Refer to GROUP 27.)
16. Backing plate