Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 125 / 1164

GDI <4G6> -
Service Specifications/Sealant
13A-7
SERVICE SPECIFICATIONS
Item Standard value
Adjustment voltage of throttle position sensor
(1st channel) V
0.4 - 0.6
Adjustment voltage of throttle position sensor
(2nd channel) V
4.2 - 4.8
Resistance of throttle position sensor k W 1.7 - 3.8
Adjustment voltages (1) and (2) of accelerator pedal position
sensor V
0.4 - 1.0
Resistance (1) and (2) of throttle position sensor k W 3.5 - 6.5
Intake air temperature sensor at 20 _ C 2.3 - 3.0
resistance k W
at 80 _ C 0.30 - 0.42
Engine coolant temperature at 20 _ C 2.1 - 2.7
sensor resistance k W
at 80 _ C 0.26 - 0.36
Fuel pressure High-pressure side MPa 4 - 7.5
Low-pressure side kPa Approximately 324
Injector coil resistance W 0.9 - 1.1
Oxygen sensor output voltage V 0.6 - 1.0
Oxygen sensor heater resistance W 11 - 18
Throttle valve control servo resistance W 1.35 - 1.65
SEALANT
Item Specified sealant Remark
Engine coolant temperature sensor
threaded portion
3M Nut Locking Part No. 4171 or equivalent Drying sealant