Mitsubishi MOTORS Pajero, Owner'S Manual

Page: 55 / 377

3. Fold the stands forward from the seat side,
while lifting the front end of the seat.
4. Refit the covers on both sides of the luggage
room.
5. Push knob (B) forward, raise the seatback un-
til it locks securely into place.
After the operation, push the seatback lightly
to confirm that it has actually been secured.
6. Refit the head restraints.
Making a flat seat (Except for 3-
door models equipped with the
power seat)
E00404300631
By removing the head restraints and fully reclining
the seatbacks of the seats, one large flat seat is ach-
ieved.
WARNING
l Never drive with passengers on the flat
seat. This is highly dangerous.
CAUTION
l To make a flat seat, stop the vehicle in a
safe place.
l Make sure the seat is adjusted by an
adult or with adult supervision for cor-
rect and safe operation.
l When sliding the seat, be sure not to
catch your hand or leg.
l Do not walk around on top of the seats af-
ter they have been laid flat.
l To ensure the seats are locked securely, at-
tempt to move them back and forth.
l Do not jump on, or impact the seatbacks
heavily.
l To raise the seatback, put a hand on the
seatback and raise slowly. Never have a
child do this operation, or an unexpected
accident may result.
1. If your vehicle is equipped with a rear shelf (3-
door models) / cargo area cover (5-door mod-
els), remove it before performing the follow-
ing steps. Refer to “Rear shelf (3-door mod-
els)” on page 5-95 and “Cargo area cover (5-
door models)” on page 5-96.
2. Remove the head restraints from the front
seats.
If your vehicle is equipped with the third seat
(5-door models), store the third seat into the
luggage floor box.
Refer to “Head restraints” on page 2-11 and
“Storage of the third seat” on page 2-14.
3. Slide the front seats fully forward, then tip
their seatbacks backward.
On 5-door models, slide the front seats back-
ward until their seatbacks touch the second
seat.
Seat and seat belts
2-18
2
OBKE12E1