Mitsubishi MOTORS PAJERO OBKE10E1, Owner'S Manual

Page: 51 / 394

Making a luggage area
E00403400013
CAUTION
l Do not stack luggage above the seatback
height.
Secure the luggage firmly.
Serious accidents could result due to un-
restrained objects entering the passenger
compartment during sudden braking.
l When folding, storing or removing the
seat, be sure not to catch your hand or leg.
Folding the rear seatbacks forward (3-
door models) / Folding the second seat-
backs forward (5-door models)
E00403500232
The passenger and luggage compartments can be
joined by folding the rear (3-door models) / second
(5-door models) seatback forward. This is useful
for carrying long objects.
To fold
1. If your vehicle is equipped with a rear shelf (3-
door models) / cargo area cover (5-door mod-
els), remove it before performing the follow-
ing steps. Refer to “Rear shelf (3-door mod-
els)” on page 5-119 and “Cargo area cover (5-
door models)” on page 5-120.
2. Lift up the knob (A) behind the seatback,
then tilt the seatback forward.
NOTE
l Each seatback can be folded forward using
the knob on its side.
3. Push the seat until you hear a “click” and the
seat locks securely.
To replace
Raise the seatback until it locks securely into place.
Push lightly on the seatback to confirm that it has
actually been secured.
Folding the rear seats (3-door mod-
els) / Folding the second seats (5-door
models)
E00403700221
To create luggage space, you can fold the rear (3-
door models) / second (5-door models) seats.
If your vehicle is equipped with the third seat, by
folding the second seat, you can get in and out easier.
WARNING
l When driving the vehicle, do not allow
anyone to sit on the third seat if the sec-
ond seat is in the foldeddown position.
The second seat could tip rearward in the
event of hard braking or a collision, result-
ing in serious injuries.
Seat and seat belts
2-13
2