Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022 Owner'S Manual Download Page 222

Page: 222 / 535

(221,1)

[ Edit: 2021/ 2/ 10

Model: DG-D ]

WAE0563X

3. Slowly back up the vehicle adjusting the

steering wheel so that the predictive course
lines

enter the parking space

4. Maneuver the steering wheel to make the

vehicle width guide lines

parallel to the

parking space

while referring to the

predictive course lines.

5. When the vehicle is parked in the space

completely, move the shift lever to the P
(Park) position and apply the parking brake.

WAE0423X

ADJUSTING THE SCREEN

1. Push the MENU button

2. Touch the “Settings” key and then touch the

“Camera” key.

3. Touch the “Display Settings” key.

4. Touch the “Brightness”, “Contrast”, “Tint”,

“Color”, or “Black Level” key.

5. Adjust the item by touching the “+” or “–”

key on the touch screen display.

NOTE:

Do not adjust any of the display settings of
the Rearview camera while the vehicle is
moving. Make sure the parking brake is
firmly applied.

Monitor, heater, air conditioner, audio and phone systems

4-7

Condition:

Summary of Contents for OUTLANDER SPORT/RVR 2022
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands