Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022 Owner'S Manual Download Page 137

Page: 137 / 535

(136,1)

[ Edit: 2021/ 2/ 10

Model: DG-D ]

2-44

Instruments and controls

Do not place any type of liquid on or spray
water or spill beverages in the HUD
Opening or near.

If the switches, wires, or electrical compo-
nents become wet, they could malfunction
or cause a vehicle fire.

If you accidentally spill a beverage, wipe
up as much liquid as possible and im-
m e d i a t e l y

c o n s u l t

a n

a u t h o r i z e d

Mitsubishi Motors dealer or a repair
facility of your choice.

The Head-Up Display (HUD) is displayed on
the windshield in front of the driver.

The HUD can display one or more of the
following features:

Vehicle speed

Navigation (if so equipped)

Driving Assist

Traffic Sign (if so equipped)

Audio

TEL/SMS

NOTE:

Do not touch any internal parts of the
projector. Doing so may cause malfunc-
tion of the equipment.

To prevent scratches to the projector
glass, do not place any sharp objects on
or near the projector opening.

Do not place any objects on the instru-
ment panel which may obstruct the
display of the HUD.

If you wear polarized sunglasses, the
display may be difficult to see.

Depending on weather conditions (rain,
snow, sunlight, etc.), the display may be
difficult to see.

WAC0484X

HOW TO USE THE HUD

To turn the HUD system on, push the HUD
switch located on the driver’s left side instru-
ment panel. To turn the HUD off, push the
switch again.

If the HUD system is turned off, it will remain
off even if the vehicle is restarted.

The following settings can be changed in the
multi-information display:

Brightness

Height

Rotation

Displayed information

Condition:

Summary of Contents for OUTLANDER SPORT/RVR 2022
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands