Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 293 / 548

Ultrasonic misacceleration Mitigation System*
E00643400163
The Ultrasonic misacceleration Mitigation System operates to prevent sudden starts and mitigate collision-caused damages by suppressing the
motor output for up to approximately 5 seconds when the system judges that the system has detected a vehicle or obstacles within approximately
4 m in front and behind your vehicle and judges that accelerator pedal was depressed promptly and too strongly such as misoperation of it. This
system operates when the vehicle is at stop or moving forward or backward at a speed of approximately 10 km/h (6 mph).
When the Ultrasonic misacceleration Mitigation System operates, the warning display appears on the information screen of the multi information
display, and the buzzer sounds intermittently.
Ultrasonic misacceleration Mitigation System ON/OFF is switched in conjunction with the ON/OFF state of the Forward Collision Mitigation.
(Vehicles equipped with Forward Collision Mitigation System)
Situation Operation display Buzzer
When an obstacle is detected in front of your vehicle with the
select position in the “D”, if the accelerator pedal is depressed
promptly and too strongly, the motor output is suppressed for
up to approximately 5 seconds.
*UMS: Ultrasonic misacceleration Mitigation System
Intermittent
beeping sound
Ultrasonic misacceleration Mitigation System*
7-74
OGGE17E1
Starting and driving
7