Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 228 / 548

When the headlamps of the vehicles behind
you are very bright, the reflection factor of
the rear-view mirror is automatically changed
to reduce the glare.
When the operation mode of the power
switch is put in ON, the reflection factor of
the mirror is automatically changed.
NOTE
l
Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.
Type 3
When the headlamps of the vehicles behind
you are very bright, the reflection factor of
the rear-view mirror is automatically changed
to reduce the glare.
When the operation mode of the power
switch is put in ON, the green indicator (1) il-
luminates and the reflection factor of the mir-
ror is automatically changed.
NOTE
l Do not hang items on, or spray glass cleaner
on the sensor (2), as reduced sensitivity
could result.
NOTE
l If you want to stop the automatic mode,
press the switch (3) for approximately 2 sec-
onds and the indicator (1) will go off.
To return to the automatic mode, press the
switch again or put the operation mode of
the power switch in ON after putting the op-
eration mode in OFF.
Outside rear-view mirrors
E00600900628
To adjust the mirror position
E00601001737
The outside rear-view mirrors can be operat-
ed when the operation mode is put in ON or
ACC.
WARNING
l Do not attempt to adjust the rear-view
mirrors while driving. This can be dan-
gerous.
Always adjust the mirrors before driving.
Outside rear-view mirrors
7-09
OGGE17E1
Starting and driving
7