Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 215 / 548

NOTE
l The rear window wiper will automatically
perform several continuous operations if the
selector lever is put in the “R” position while
the windscreen wipers or the rear window
wiper is operating. (automatic operation
mode)
After the automatic operation, the rear win-
dow wiper will stop operating if the knob is
in the “OFF” position. If the knob is in the
“INT” position, the rear window wiper will
return to the intermittent operation.
It is possible to set the rear window wiper to
perform the automatic operation only if the
selector lever is put in the “R” position while
the rear window wiper is operating with the
knob in the “INT” position.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment.
Refer to the separate owner’s manual for de-
tails.
l If the knob is in the “OFF” position, turn the
knob to the “INT” position twice quickly to
operate the rear window wiper continuously.
(continuous operation mode)
Turn the knob to the “OFF” position to stop
the rear window wiper continuous operation.
NOTE
l The interval for intermittent operation can be
adjusted.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment. Refer to the separate owner’s
manual for details.
Headlamp washer switch
E00510101658
The headlamp washer can be operated with
the operation mode in ON or ACC and the
lamp switch at the “
” position.
Push the button once and the washer fluid
will be sprayed on to the headlamps.
NOTE
l If the operation mode is in ON or ACC and
the headlamps are on, the headlamp washer
operates together with the windscreen wash-
er the first time the windscreen washer lever
is pulled.
Precautions to observe when
using wipers and washers
E00507601327
l If the moving wipers become blocked
partway through a sweep by ice or other
deposits on the glass, the wipers may
temporarily stop operating to prevent the
motor from overheating. In this case,
park the vehicle in a safe place, put the
operation mode in OFF, and then re-
move the ice or other deposits.
The wipers will start operating again af-
ter the wiper motor cools down, so
check that the wipers operate before us-
ing them.
l Do not use the wipers when the glass is
dry.
They may scratch the glass surface and
the blades wear out prematurely.
l
Before using the wipers in cold weather,
check that the wiper blades are not fro-
zen onto the glass. The motor may burn
out if the wipers are used with the blades
frozen onto the glass.
Wiper and washer switch
6-68
OGGE17E1
Instruments and controls
6