Mitsubishi MOTORS Outlander PHEV 2016 Owner'S Manual Download Page 380

Page: 380 / 490

WARNING

Sunglasses holder*

E00718601417

To open, push the lid.

CAUTION

The holder should not be used to store any-
thing heavier than sunglasses. These objects
could drop out.

NOTE

The holder may not be able to accomodate
every possible size and shape of sunglasses;
it is advisable to check compatibility before
use.

Cup holder

E00714502200

CAUTION

Do not drink beverages while driving. This
is distracting and could cause an accident.

For the front seat

The cup holder is located in front of the floor
console.

To use the cup holder, push the lid.

For the rear seat

E00716901562

In order to use the cup holder, allow the arm-
rest to drop down.

Cup holder

8-80

OGGE16E1

For pleasant driving

Summary of Contents for Outlander PHEV 2016











































































































































































































































































































































































































































































































Search results

Summary of Contents for Outlander PHEV 2016

Reviews:

Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 380 / 490

Search results

Summary of Contents for Outlander PHEV 2016

Reviews: