Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 260 / 490

CAUTION
• When your vehicle is on a chassis dyna-
mometer or free rollers.
• When the tyre pressure is not correct.
• When installing the spare tyre for emer-
gency.
• When snow traction device (tyre chains)
are attached.
l Improperly handling the system components
may result in such problems as degraded
sensor performance and ultimately in an ac-
cident. Be sure to take the following precau-
tions to keep the system in good operating
conditions.
• Avoid application of strong shock loads to
the sensor and never tamper with or re-
move the sensor mounting screws.
• The cover in front of the sensor and the
sensor should be kept clean.
CAUTION
• Do not cover the sensor mounted area
(shaded area as shown in the illustration)
with a sticker, licence plate or anything
such as a grill guard, etc.
• The sensor front cover should not be
modified or painted.
• Avoid using different size tyres from
those specified and maintain even tyre
wear.
• Do not modify the suspension of your ve-
hicle.
CAUTION
l If the sensor mounted area of the vehicle is
deformed due to an accident or some other
causes, turn off the system and please con-
tact a MITSUBISHI MOTORS Authorized
Service Point.
NOTE
l A sound will be heard during the activation
of automatic braking, this is a function of the
brake control and is not abnormal.
FCM and Ultrasonic misaccel-
eration Mitigation System
ON/OFF switch
E00635601192
This switch is used to turn on and off the
FCM/Ultrasonic misaccelration Mitigation
System and also to select your desired colli-
sion alarm timing.
Forward Collision Mitigation System (FCM)*
7-60
OGGE16E1
Starting and driving
7