Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 243 / 490

CAUTION
l Be careful about over speed.
NOTE
l
A driver can change the set speed during this
emergency use.
To deactivate
E00634401050
Use whichever following ways to deactivate.
And the state of the Speed Limiter ON indi-
cation, control state “LIMIT” is displayed
and the set speed is changed.
l Press CANCEL switch
l
Press the Speed Limiter ON/OFF switch
l If CRUISE CONTROL ON/OFF switch
or ACC ON/OFF switch is pressed, the
Speed Limiter will be cancelled.
NOTE
l If the Speed Limiter is cancelled by other
states, it may be a system malfunction.
Stop using the Speed Limiter and turn off
the Speed Limiter. Have your vehicle in-
spected by a MITSUBISHI MOTORS Serv-
ice Point.
CAUTION
l There is a possibility for the Speed Limiter
to allow abrupt acceleration corresponding
to accelerator pedal position when the Speed
Limiter is deactivated. Be careful.
To resume
E00634501048
The Speed Limiter memorizes the set speed
when system has been deactivated, the Speed
Limiter can resume by push up the RES +
switch (C).
However, the Speed Limiter immediately
starts controlling and the vehicle decreases as
if an accelerator pedal is closed fully, when
the vehicle speed is higher than the set speed.
CAUTION
l There is a possibility to occur jerk, depend-
ing on a running resistance. Be careful.
Adaptive Cruise Control
System (ACC)*
E00634601166
The ACC maintains a set speed with no need
for you to use the accelerator pedal. Using a
sensor (A), the system also measures the rela-
tive speed and distance between your vehicle
and a vehicle in front, and maintains a set fol-
lowing distance between your vehicle and the
vehicle in front by automatically decelerating
your vehicle if it becomes too close to the ve-
hicle in front.
The ACC is the driver assist system to make
comfortable on a freeway. Stop lamps are il-
luminated during automatic braking.
Adaptive Cruise Control System (ACC)*
7-43
OGGE16E1
Starting and driving
7