Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 214 / 490

NOTE
l If you perform the following operation, the
buzzer may sound and the select position
may automatically shift to “N” position.
• Presses the electrical parking switch dur-
ing running.
• Shifts the selector lever to “R” while driv-
ing forward.
• Shifts the selector lever to “D” while driv-
ing backward.
• Shifts the selector lever to “B” in “R” po-
sition.
l If you perform the following operation, the
buzzer sounds and the select lever operation
is cancelled.
• When in “P” position, shifts the selector
lever without depressing the brake pedal.
• When in “P” or “N” position, shifts the
selector lever to (B).
• When the operation mode in ON with the
Plug-in Hybrid EV System is not operat-
ed, the selector lever is shifted to “D” or
“R” position.
l If you shift and hold the selector lever for
about 10 seconds or longer, the buzzer
sounds.
The buzzer stops sounding when you release
the selector lever.
l If the driver’s door is opened while the vehi-
cle is stopped or is running at very low
speed with the select position in other than
“P” position and the READY indicator in
the meter is illuminating, the buzzer sounds.
The buzzer stops sounding if you close the
door or shift the selector lever to “P”.
Select Position indicator
E00636300085
This indicator displays the selector lever po-
sition in the meter.
NOTE
l When the “B” position is selected, the selec-
ted regenerative brake force position is also
displayed at “B” position.
l You cannot operate the regenerative brake
while the adaptive cruise control system
(ACC) is operating.
l If you perform the following operation, the
buzzer may sound and the select position
may automatically shift to “N” position.
• The electrical parking switch is pressed
during driving.
• The selector lever is shifted to “R” during
driving forward.
NOTE
• The selector lever is shifted to “D” during
driving backward.
• The selector lever is shifted to “B” when
the select position is in “R”.
Selector lever positions
E00636400060
“P” PARK
The wheels are locked. When you park your
vehicle, be sure to apply the parking brake
and press the electrical parking switch.
“R” REVERSE
This position is to back up.
“N” NEUTRAL
No power is transmitted to the wheels. The
wheels are not locked.
WARNING
l Never move the selector lever to the “N”
(NEUTRAL) position while driving, you
will lose Regenerative braking.
l Always keep your right foot on the brake
pedal when shifting into or out of “N”, to
minimize the risk of loss of control.
Select Position indicator
7-14
OGGE16E1
Starting and driving
7