Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 210 / 490

NOTE
l Your vehicle is equipped with an electronic
immobilizer.
To start the Plug-in Hybrid EV System, the
ID code which the transponder inside the
key sends, must match the one registered in
the immobilizer computer. Refer to “Elec-
tronic immobilizer (Anti-theft starting sys-
tem)” on page 4-03.
Changing the operation mode
E00631901041
If you press the power switch without de-
pressing the brake pedal, you can change the
operation mode in the order of OFF, ACC,
ON, OFF.
CAUTION
l When the Plug-in Hybrid EV System is not
operating, put the operation mode in OFF.
Leaving the operation mode in ON or ACC
for a long time when the Plug-in Hybrid EV
System is not operating may cause the auxil-
iary battery to discharge, making it impossi-
ble to start the Plug-in Hybrid EV System.
l When the auxiliary battery is disconnected,
the current operation mode is memorized.
After reconnecting the auxiliary battery, the
memorized mode is selected automatically.
Before disconnecting the auxiliary battery
for repair or replacement, make sure to put
the operation mode in OFF.
Be careful if you are not sure which opera-
tion mode the vehicle is in when the auxili-
ary battery is run down.
l The operation mode cannot be changed from
OFF to ACC or ON if the keyless operation
key is not detected to be in the vehicle. Refer
to “Keyless operation system: operating
range for starting the Plug-in Hybrid EV
System and changing the operation mode”
on page 4-09.
ACC power auto-cutout func-
tion
E00632801034
After about 30 minutes has elapsed with the
operation mode in ACC, the function auto-
matically cuts out the power for the audio
system and other electric devices that can be
operated with that position.
When the power switch operates again, the
power is supplied again.
NOTE
l It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult
a MITSUBISHI MOTORS Authorized
Service Point.
On vehicles equipped with MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment.
Refer to the separate owner’s manual for
details.
Operation mode OFF reminder
system
E00632201041
Power switch
7-10
OGGE16E1
Starting and driving
7