manualshive.com logo in svg

Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 159 / 490

Share
Download
Mitsubishi MOTORS Outlander PHEV 2016 Owner'S Manual Download Page 159

14- Active Stability Control (ASC) OFF in-

dication lamp 

®

 p. 7-33

15- Anti-lock brake system (ABS) warning

lamp 

®

 p. 7-29

16- Supplement Restraint System (SRS)

warning lamp 

®

 p. 5-38

17- Ready indicator 

®

 p. 6-44

18- Seat belt warning lamp 

®

 p. 5-11

19- Tyre pressure monitoring system warn-

ing lamp 

®

 p. 7-72

20- Check engine warning lamp 

®

 p. 6-45

21- Brake warning lamp 

®

 p. 6-44

 

Information screen display list

E00523901344

When there is information to be announced, such as lamp reminder, the buzzer sounds and the screen switches to the displays shown below.
Refer to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to “Warning display list” on page 6-24.
Refer to “Navigation information display” on page 6-36.
Refer to “Other interrupt displays” on page 6-38.

NOTE

l

A warning may be displayed on the information screen and the buzzer may sound in the following rare cases.
This is caused by the system picking up interference such as noise or strong electromagnetic waves, and is not a functional problem.

•

An extremely strong electromagnetic wave is received from a source such as an illegal radio set, a spark from a wire, or a radar station.

•

Abnormal voltage or a static electricity discharge is generated by the operation of installed electrical equipment (including after-market parts).

If the warning display appears many times, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.

 

Indication lamp, warning lamp, and information screen display list

6-23

OGGE16E1

Instruments and controls

6

Summary of Contents for Outlander PHEV 2016











































































































































































































































































































































































































































































































Reviews:

No comments