Mitsubishi MOTORS Mirage 2012, Owner'S Manual

Page: 49 / 250

The head restraint stalk with the adjustment notch-
es (B) must be installed in the hole with the adjust-
ing knob (A).
CAUTION
l
Confirm that the height adjusting knob
(A) is correctly adjusted as shown in the
illustration, and also lift the head re-
straints to ensure that they do not come
out of the seatback.
CAUTION
l The shape and size of the head restraint
differs according to the seat. Always use
the correct head restraint provided for
the seat and do not install the head re-
straint in the wrong direction.
Seat belts
E00404800883
To protect you and your passengers in the event of
an accident, it is most important that the seat belts
are worn correctly while driving.
The front seat belt have a pretensioner system.
These belts are used the same way as a convention-
al seat belt.
Refer to “Seat belt pretensioner system and force
limiter system” on page 2-08.
WARNING
l
Seat belts should always be worn by ev-
ery adult who drives or rides in this vehi-
cle, and by all children who are tall
enough to wear seat belts properly.
Other children should always use proper
child restraint systems.
l
Always place the shoulder belt over your
shoulder and across your chest. Never
put it behind you or under your arm.
l One seat belt should be used by only one
person. Doing otherwise can be dangerous.
l The seat belt will provide its wearer with
maximum protection if the recliner seat-
back is placed in fully upright position.
When the seatback is reclined, there is
greater risk that the passenger will slide
under the belt, especially in a forward im-
pact accident, and may be injured by the
belt or by striking the instrument panel
or seatbacks.
l
Remove any twists when using the belt.
Seat and seat belts
2-05
OA0X13E4
2