67
10-4. Reprogramming Operation ( VCI alone )
10-4-1. Data transfer (PC -> Memory Card)
(1) Start up the MUT-III system.
Insert the Memory card (MB991853) into the Card Adaptor
(MB991939), and then insert them into m-card slot on PC.
The message will be displayed on the monitor when the
card inserted properly. Wait till the message disappears.
(2) Select
Special function
button on Start menu screen.
(3) Select
System Function
tab, and
ECU reprogramming
button.
Caution:
-In case an update CD-ROM is set in the PC with update
undone, data update starts. (refer to 10-3-1(4))
(4) Select
Memory card transfer
button.
ALL reprogramming data in the MUT-III PC are transferred
to Memory card.
[Caution]
-Do not remove the Memory card from PC.
(5) Select a memory card drive and press the button.
ECU Reprogramming