Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Page: 64 / 330

To recline the seatback
E00400600708
Adjust the seatback angle by turning the knob.
1- To move to forward direction
2- To recline backward
Heated seats*
E00401100814
The heated seats can be operated with the ignition
switch in the “ON” position. Operate the switch as
indicated by arrows.
The indication lamp (A) will illuminate while the
heater is on.
1 (HI)- Heater high (for quick heating).
2- Heater off.
3 (LO)- Heater low (to keep the seat warm).
CAUTION
l
Switch off seat heaters when not in use.
l
Operate in the “HI” position for quick
heating. Once the seat is warm, set the
heater switch to the “LO” position to
keep it warm. Slight variations in seat
temperature may be felt while using the
heated seats. This is caused by the opera-
tion of the heater’s internal thermostat
and does not indicate a malfunction.
l
If the following types of persons use the
heated seats, they might become too hot
or receive minor burns (red skin, heat
blisters, etc.):
• Children, elderly or ill people
• People with sensitive skin
• Excessively tired people
• People under the influence of alcohol
or sleep inducing medication (cold
medicine, etc.)
l
Do not place heavy objects on the seat or
stick pins, needles, or other pointed ob-
jects into it.
l
Do not use a blanket, cushion, or other
material with high heat insulation prop-
erties on the seat while using the heater;
this might cause the heater element to
overheat.
CAUTION
l
When cleaning the seat, do not use ben-
zine, kerosene, petrol, alcohol, or other
organic solvents; these might damage the
surface of the seat and also the heater ele-
ment.
l
If water or any other liquid is spilled on
the seat, allow it to dry thoroughly before
attempting to use the heater.
l
Turn the heater off immediately if it ap-
pears to be malfunctioning during use.
Seat and seat belts
2-04
OCZE14E3
2