Mitsubishi MOTORS Eclipse Cross 2019, Owner'S Manual

Page: 475 / 602

Refer to the illustration to ensure that the
retainers are correctly aligned as you in-
sert them into the groove.
NOTE
l If a retainer is not supplied with the new
wiper blade, use the retainer from the old
blade.
General maintenance
Fuel, engine coolant, oil and ex-
haust gas leakage
Look under the body of your vehicle to check
for fuel, engine coolant, oil and exhaust gas
leaks.
WARNING
l If you see a suspicious fuel leak or if you
smell fuel, do not operate the vehicle; call
your MITSUBISHI MOTORS Author-
ized Service Point for assistance.
Exterior and interior lamp op-
eration
Operate the combination headlamps and dip-
per switch to check that all lamps are func-
tioning properly.
If the lamps do not illuminate, the probable
cause is a blown fuse or defective lamp bulb.
Check the fuses first. If there is no blown
fuse, check the lamp bulbs.
For information regarding the inspection and
replacement of the fuses and the bulbs, refer
to “Fuses” on page 10-20 and “Replacement
of lamp bulbs” on page 10-24.
If the fuses and bulbs are all OK, we recom-
mend you to have your vehicle checked and
repaired.
Meter, gauge and indicator/
warning lamps operation
Start the engine and check the operation of
all instruments, gauges and indication and
warning lamps.
If there is anything wrong, we recommend
you to have your vehicle inspected.
Hinges and latches lubrication
Check all latches and hinges, and, if necessa-
ry, have them lubricated.
Fusible links
The fusible links will melt to prevent a fire if
a large current attempts to flow through cer-
tain electrical systems.
In case of a melted fusible link, we recom-
mend you to have your vehicle inspected.
For the fusible links, please refer to “Fuse
load capacity” on page 10-21 and “Engine
compartment fuse location table” on page
10-22.
General maintenance
10-19
OGKE20E1
Maintenance
10