Mitsubishi MOTORS Eclipse Cross 2019, Owner'S Manual, Page: 211 / 602

NOTE
l
For diesel-powered vehicles, if the tempera-
ture inside the engine compartment is high,
the cooling fans (A) will continue to operate
for some time even if the engine is stopped.
Therefore, the operation sound of the cool-
ing fans may be heard even after the engine
is stopped. This sound is normal and does
not indicate a malfunction.
After operating for a period of time, the
cooling fans will stop automatically.
*: Front of the vehicle
Fuel injection amount learning
process (diesel-powered vehi-
cles)
To keep exhaust emissions and engine noise
low, the engine very occasionally performs a
learning process for the fuel injection
amount.
The engine sounds slightly different from
usual while the learning process is taking
place. The change in the engine sound does
not indicate a fault.
If the keyless operation key is
not operating properly
The following operation can be used to start
the engine or change the operation mode.
1. Depress the brake pedal firmly with your
right foot (A/T or CVT) or the clutch
pedal (M/T).
2. While depressing the brake pedal (A/T
or CVT) or the clutch pedal (M/T),
touch the portion of the keyless opera-
tion key shown in the illustration to the
engine switch.
3. If the keyless operation key is recog-
nized, the indication lamp (A) on the en-
gine switch illuminates in green, and
then the engine can be started and the
operation mode can be changed within
approximately 10 seconds. Refer to
“Starting the engine” on pages 6-20,
6-24 and “Changing the operation
mode” on page 6-16.
NOTE
l If metal objects or other keys are near the
keyless operation key, the keyless operation
key may not be recognized.
l Instead of depressing the brake pedal, the
keyless operation key can also be recognized
in the same way within approximately 30
seconds after pushing the engine switch.
l To change the operation mode without start-
ing the engine, release the brake pedal (A/T
or CVT) or the clutch pedal (M/T) after the
indication lamp on the engine switch illumi-
nates in green, and then press the engine
switch.
Starting and stopping the engine
6-25
OGKE20E1
Starting and driving
6