Mitsubishi MOTORS Eclipse Cross 2018, Owner'S Manual, Page: 249 / 538

To activate cruise control (au-
tomatic speed control)
If you hold the ACC ON/OFF switch pressed
with the ignition switch or operation mode
set to ON and the ACC in the OFF state, the
cruise control is activated. The information
screen of the multi-information display then
changes to the cruise control screen and a
buzzer sounds at the same time. Cruise con-
trol is turned off if you set the ignition switch
to the “LOCK” or the operation mode to
“OFF”.
Refer to “Cruise control” on page 6-57.
CAUTION
l
Cruise control (automatic vehicle speed con-
trol system) does not alert by proximity
alarm and control distance between vehicles
to the vehicle in front.
Forward Collision
Mitigation System (FCM)
The Forward Collision Mitigation System
(FCM) uses a sensor (A) to determine the
distance and relative speed to a vehicle and a
pedestrian in front. When your vehicle is ap-
proaching a vehicle or a pedestrian straight-
ahead in your path and the FCM judges that
there is the risk of a collision, the system
gives audible and visual warnings (forward
collision warning function), increases the
brake fluid pressure (FCM brake prefill func-
tion), and also provides braking force assis-
tance when you depress the brake pedal
(FCM brake assist function) to avoid frontal
collision.
When the risk of collision increases more, the
system causes the brakes to work moderately
to encourage you to apply brakes. If the sys-
tem judges that a potential collision is immi-
nent, it initiates emergency braking to miti-
gate collision-caused damages or to avoid
possible collision (FCM braking function).
Stop lamps are illuminated during automatic
braking.
Type 1
Forward Collision Mitigation System (FCM)
6-79
OGKE18E5
Starting and driving
6