Mitsubishi MOTORS ASX Series, Owner'S Manual

Page: 237 / 514

System problem warning
E00693300082
If there is a malfunction in the system, a
warning will appear on the information
screen of the multi-information display de-
pending on the situation.
Windscreen is dirty
When the FCM system determines that its
performance has been degraded, the FCM
will become inoperative.
This can occur when:
l Foreign objects, such as dirt, snow or
ice, adhere to the windscreen of the sen-
sor portion.
l There are adverse weather conditions,
such as rain, snow, sand storms, etc.
l A vehicle in front or an oncoming vehi-
cle is splashing water, snow or dirt.
The following message will appear on the in-
formation screen of the multi-information
display and the indicator will come on in
the instrument cluster.
When the sensor performance returns, the
FCM functions will resume operation.
If the display keeps showing the message,
there is a possibility that the sensor has a
malfunction. Contact a MITSUBISHI
MOTORS Authorized Service Point for in-
spection of the sensor.
NOTE
l
The “CAMERA BLOCKED” message may
temporarily appear on the information
screen when the sensor cannot detect a vehi-
cle, a pedestrian or an object within range.
This is not a malfunction. When a vehicle or
an object comes within range, the FCM
function will resume and the message will
go off.
l
The “CAMERA BLOCKED” message may
appear on the information screen when driv-
ing on a nonbusy road with a few vehicles
and obstacles in front.
When the system cannot oper-
ate temporarily
If the system becomes temporarily unavaila-
ble for some reason, the following message
will appear on the information screen of the
multi-information display, the
indicator
will come on in the instrument cluster and the
FCM will automatically be turned off.
If the display keeps showing the message,
there is a possibility that the FCM has a mal-
function. Contact a MITSUBISHI MOTORS
Authorized Service Point for inspection of
the system.
Sensor is too hot or cold
If the system becomes temporarily unavaila-
ble due to the high or low temperature of the
sensor, the following message will appear on
the information screen of the multi-informa-
tion display, the indicator will come on in
the instrument cluster and the FCM will auto-
matically be turned off.
After the temperature of the sensor has been
in range, the system will automatically return
to operation.
Forward Collision Mitigation system (FCM)*
6-65
OGAE18E1
Starting and driving
6