Mitsubishi MOTORS 2018 MIRAGE, Owner'S Manual

Page: 43 / 354

Driver’s door with inside lock
knob
Using the door lock knob on the driver’s door
locks or unlocks all the doors and the tailgate.
1- Lock
2- Unlock
NOTE
l Be careful not to lock the doors while the
key is inside the vehicle when getting off the
vehicle.
Using the selector lever position
(CVT)
On vehicles with the keyless entry system or
the keyless operation system, it is possible to
unlock all of the doors and the tailgate using
the selector lever by placing the selector lever
in the “P” (PARK) position while the ignition
switch or the operation mode is in the “ON”
position.
NOTE
l The vehicle is shipped from the factory with
a setting established such that the doors and
the tailgate are not unlocked when the selec-
tor lever is placed in the “P” (PARK) posi-
tion with the ignition switch in the “ON” po-
sition. If you wish to change the setting so
that the doors are unlocked, please contact a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
“Child-protection” rear
doors
1- Lock
2- Unlock
Child protection helps prevent doors from be-
ing opened accidentally, especially when
small children are in the rear seat.
A lever is provided on each rear door.
If the lever is set to the locked position, the
rear door cannot be opened using the inside
handle.
To open the rear door while the child protec-
tion is in use, pull the outside door handle.
If the lever is set to the “Unlock” position,
the child protection mechanism does not
function.
“Child-protection” rear doors
3-17
OA0X19E2
Locking and unlocking
3