Mitsubishi MOTORS 2018 MIRAGE, Owner'S Manual

Page: 121 / 354

[For vehicles equipped with keyless opera-
tion system]
WARNING
l Do not operate the engine switch while
driving except in an emergency. If the en-
gine is stopped while driving, the brake
servomechanism will cease to function
and braking efficiency will deteriorate.
Also, the power steering system will not
function and it will require greater man-
ual effort to operate the steering. This
could result in a serious accident.
NOTE
l If you have to bring the engine to an emer-
gency stop while driving, press and hold the
engine switch for 3 seconds or more, or
press it quickly 3 times or more. The engine
will stop and the operation mode will go to
ACC.
l Do not stop the engine with the selector lev-
er in any position other than the “P” (PARK)
position (CVT). If the engine is stopped with
the selector lever in any position other than
the “P” (Park) position, the operation mode
will go to ACC rather than OFF.
Put the operation mode in OFF after placing
the selector lever in the “P” (Park) position.
NOTE
l
On vehicles with CVT, while the engine is
stopped automatically by Auto Stop & Go
(AS&G) system, if the selector lever is
moved to "P" (Park) position quickly with
the brake pedal firmly depressed, the engine
does not restart automatically even if you re-
lease the brake pedal. If this occurs the -
indicator will blink to inform the driver.
If you want to put the operation mode in
OFF, press the engine switch without de-
pressing the brake pedal.
1. Stop the vehicle.
2. Fully engage the parking brake while de-
pressing the brake pedal.
3. On vehicles with M/T, press the engine
switch to stop the engine, move the gear-
shift lever to the 1
st
(on a uphill) or “R”
(Reverse) (on a downhill) position.
On vehicles with CVT, move the selec-
tor lever to the “P” (PARK) position,
press the engine switch to stop the en-
gine.
If the keyless operation key is
not operating properly
Insert the keyless operation key into the key
slot. Starting the engine and changing the op-
eration mode should now be possible.
Remove the keyless operation key from the
key slot after starting the engine or changing
the operation mode.
LHD
NOTE
l Do not insert into the key slot anything other
than the keyless operation key. This could
cause damage or a malfunction.
Starting and stopping the engine
6-19
OA0X19E2
Starting and driving
6