12-101
1 Fluid level check
Check the washer fluid level through level check
window .
When the level has dropped to the lower part of the
window or is not visible at all, refill the tank with
washer fluid.
2 Refilling
1. Open the assistant driver’s door.
2. Open windshield washer tank cap and pour a
mixture of windshield washer fluid and tap water
into the tank up to the top end of the fluid level
inspection window .
3. Close the cap tightly after refilling.
CAUTION
•
Substituting soapy water for washer fluid
could result in clogged washer nozzles or
spots on painted surfaces.
•
Operating the washer continuously for more
than 20 seconds or when there is no fluid in
the reservoir could burn out the washer
motor.
NOTE:
When it is very cold, the ratio of windshield washer
fluid to water should be increased in order to pre-
vent the mixture from freezing up.
Windshield washer – fluid level
check and refilling
Windshield washer fluid
quantity
Approx. 2.9 liters
Z21101
Summary of Contents for CANTER
Page 23: ...2 1 Labels inside the cab 2 3 Exterior labels 2 6 2 Warning labels ...
Page 325: ...12 23 Z22021 FG ...
Page 454: ...13 35 Z22249 Z21702 ...
Page 464: ...15 1 15 Alphabetical index ...