46
VS-60HS12U Set-up Manual
Di
spl
ay
me
mo
ry
s
ett
in
g
3.7.3
Display memory saving
DISPLAY MEMORY > DISPLAY MEMORY SAVE
The adjusted layouts can be saved in a display memory. There are 256 memories available.
A change in a display memory shows DISPLAY SETTING SAVE menu when going back to the TOP menu by [ESC]
button.
Select YES and designate a memory number to save in. The current setting will be saved in the memory. When the
number has already been registered, an overwrite confirmation message will be displayed.
In Wallaby, when you finish the adjustment, surely click “Save” button to store the setting in each monitor.
The “Save” button shows the “Save Display Memory” window. You can leave up to 16 letters in the comment field.
Specify the display memory number to save the setting in, and click “Save”.
3.7.4
Display memory calling / deleting
Registered display memories can be called or deleted when needed.
[MEM LIST] button on the remote control shows MEMORY CALL menu.
Or select MEMORY CALL in TOP menu.
n
Call: Select DISPLAY MEMORY > MEMORY CALL and designate a
memory number to be called. Or it also can be called by 3-digit
number with the remote control. Press 001 for display memory 1
(page 8).
In Wallaby, double-click the display memory to be called in the display memory list.
•
Under AUTO SCAN ON status (page 35), if you have allocated an “input port” as its input signal of the window,
the signal scan automatically runs at memory calling. If an “input memory” has been allocated, the image is
displayed in the input memory setting regardless of AUTO SCAN setting.
n
Delete: Select DISPLAY MEMORY > MEMORY DELETE and designate a memory number to be deleted. ”DELETE
OK?” > YES deletes the momory.
In Wallaby, right-click the display memory in the display memory list and click “Delete”.
In Wallaby, the right-click menus change the display method in the memory list, the same manner as input memory
(page 41). “Refresh” menu refreshes the list.
Display memory list
