SP-321V
Optional Accessory Speakers for LDT321V LCD Monitor
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
Presentation Products Division
Toll Free: 888.307.03479
Email: [email protected]
www.mitsubishi-presentations.com
Canada
Mitsubishi Electric Sales Canada Inc.
Information Technologies
Phone:905.475.7728
www.mitsubishielectric.ca
©
2007 Mitsubishi Digital Electronics America,
Inc. Standard features, options and
specifications subject to change without
notice. All trademarks are the property of their
respective holders.
Part Number
SP-321V (designed for
LDT321V)
Frequency
Response
100Hz – 20kHz
Power
7W + 7W @ 8 ohms with
10% THD
Dimensions
(WxHxD)
2.9” x 18.75” x 3.3”
73.6 x 476 x 83.82mm
Weight
2.0 lbs
(net)
Contents
Speakers (2), Speaker wire
(2), Mounting brackets (4),
Speaker screws (12), Quick
Start Guide
Follow these steps to connect the speakers to
your LCD monitor:
1.
Turn off the power switch on the LCD.
2.
Screw appropriate mounting brackets into the
appropriate position on each speaker (2
brackets per speaker) using black screws.
Figure 1. (2 screws per bracket.)
3.
Screw mounting brackets / speakers to the
LCD using one (1) black screw per bracket.
Figure 2.
4.
Once both speakers are attached to the LCD,
connect the speaker wires to the terminals on
the LCD and then to the terminals on
attached speakers. Figure 3.
5.
Turn the LCD power on.
1.6”
(41mm)
18.75”
(476mm)
1.2”
(30mm)
9.2”
(234mm)
2.9”
(73.7mm)
3.3”
(83.8mm)
1.2”
(30mm)
