234
9.8
Remote Operation
Remote operations (RUN, STOP, and RESET operations) can be executed from GX Works2 to the station selected on
the "CC IE Field Diagnostics" window.
The displayed window varies depending on the station selected. For the operations with a module other than a master/
local module selected, refer to the manual for the module used.
1.
Connect GX Works2 to the CPU module.
2.
Start the CC-Link IE Field Network diagnostics from
the menu.
"
[Diagnostics]
[CC IE Field Diagnostics]
3.
Select the module where the remote operations are
performed in the "CC IE Field Diagnostics" window.
4.
Click the
button in the "CC IE
Field Diagnostics" window.
Or right-click a module icon in "Network Status",
and click [Remote Operation].
The "Remote Operation" window will open.
5.
Specify the target station in "Specify Execution
Target".
Item
Description
Currently
Specified
Station
A remote operation is executed only to the CPU module
on the station selected in "Network Status" in the "CC IE
Field Diagnostics" window.
All Stations
A remote operation is performed on all stations on the
network selected under "Specify Execution Target".
Specified
Group
When the target station is on CC-Link IE Field Network,
remote operation cannot be performed by selecting this
item. If performed, an error will occur.
