8
CC IE Control UTILITY
8.4 Setting Screen
8.4.3 Equal assignment screen
8
- 17
1
OVE
R
VI
EW
2
SYS
TEM
CONFIGURA
T
ION
3
SP
ECIFI
C
A
T
IO
N
S
4
FUNCT
IONS
5
E
M
C
AND LOW
V
O
LT
A
G
E DIRECTIVE
6
P
R
OCEDURES
AND
SETTI
NGS BEFO
RE
O
PERA
T
IO
N
7
IN
ST
A
LLI
NG
AN
D
UN
IN
S
TAL
LI
N
G
S
O
F
T
W
AR
E P
A
CK
AG
E
S
8
CC
IE
Co
nt
rol
UT
ILITY
8.4.3
Equal assignment screen
This screen is displayed by clicking the
button on the "Network range
assignment" screen.
Section 8.4.2 Network range assignment screen
It is used to set the network range assignment for each station in identical points or equal
points.
*1: In LX/LY setting, the entered total points of assignment are assigned to LY for M station
L
station equal assignment, and to LX for M station
L station equal assignment.
*2: Setting ranges of the start number and total points of assignment for each device are indicated in
the following table.
LB/LW setting
LX/LY setting
Item
Description
Default
Setting range
Identical point
assignment
Select when assigning devices for each station in
identical points to the selected device setting in the
Switch screens field of the "network range
assignment" screen.
Checked
Checked
Unchecked
Points
Set points for Identical point assignment.
No setting
LB/LW:16 to 16384
LX/LY:16 to 8192
(units of 16 points)
Equal assignment
Select when equally dividing the entered total points
of assignment, and assigning to link devices for each
station.
*1
Unchecked
Checked
Unchecked
Start station
Set the start station for Equal assignment.
No setting
1 to 120
End station
Set the end station for Equal assignment.
No setting
1 to 120
Start No.
Set the start number of link devices for Equal
assignment.
No setting
Range
indicated by
*2
Total points
assigned
Set the total points of assignment.
No setting
Range
indicated by
*2
Executes Equal assignment according to the
settings, and closes the "Equal assignment" screen.
—
—
Without executing Equal assignment, closes the
"Equal assignment" screen.
—
—
Equal assignment
OK
Cancel
