Mitsubishi Electric PUHY-P1000, Service Handbook

Page: 138 / 334

[6-7 Test Run Method ]
- 129 -
HWE14040 GB
6
T
est
Ru
n
(3) Entering the maintenance information
F1 F2 F3 F4
Step 1: Switching the remote controller screen to "Maintenance information" (Requires the maintenance
password. This screen is not accessible while the controller is under centralized control.)
On the Service Menu screen, select "Input maintenance
info." and press the button.
Select "Model name input" and press the button.
Model name, serial number, and dealer's phone number can be registered to the remote controller to be displayed on the screen when an error
occurs.
1
1
2
2
1
1
1 2
1 2
Step 2: Selecting the outdoor unit address and indoor unit address information to be resistered
Select the address to be registered, using the F1 and F2 buttons, and then press the button.
Address: 0-255
1
Step 3: Registering the model name
Enter the model name. The character string can be up to 18 characters in length.
Move the cursor left with the F1 button, and right with the F2 button.
Select a character with the F3 and F4 buttons.
Press the button when done entering characters. The screen will return to the one
shown in Step 2.
Repeat Steps 2 and 3 until all the model names of the units at the selected addresses have been entered. To change the address,
press the button on the screen shown in Step 3 to return to the screen shown in Step 2, and then change the address. After
changing the address, enter the model name.
Tips: the model name information of the unit at a given address can be copied and pasted to another unit at
a different address.
Press the F3 button in Step 2 to copy the model name information of the unit at the selected address.
Press the F4 button in Step 2 to overwrite the model name information of the unit at the selected address.
1
Step 4: Registering the serial number
Select "Serial No. input" in Step 1-2 above, and then press the
button.
Register the serial number by following steps 2 and 3 above.
The serial number can be up to 8 characters in length.
1
2
Step 5: Entering your dealer's phone number
Select "Dealer information input" on the Maintenance information
screen, and press the button.
Press the button when "Dealer information" appears.
1
2
Enter your dealer's telephone number.
Telephone number can be up to 13 characters.
Move the cursor left with the F1 button, and right with the F2 button.
Select a character with the F3 and F4 buttons.
Press the button when done entering characters. 3
3
Cursor
Cursor
F1 F2 F3 F4
Service menu Maintenance information
Model information
Model registration
Test run
Input maintenance info.
Check
Model name input
Add.
Add.
Input:
Input:
End:
Select:
Serial No. input
Dealer information input
Initialize maintenance info.
Self check
Main menu:
Service menu:
Cursor
Cursor
Cursor Letter
Cursor
Letter
Address Copy
Serial No. registration
Dealer information
Dealer information
Add.
Dealer
Tel
Dealer
Tel
Select:
Address Copy
Maintenance information
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Service menu:
Cursor
Maintenance information
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Service menu:
Cursor