82
WY
MEE15K036
9. OPTIONAL PARTS
HEAT SOURCE
9-3. OUTDOOR TWINNING KIT
The following optional Outdoor Twinning Kit is needed to use to combine multiple refrigerant pipes. Refer to the chapter entitled
System Design Section for the details of selecting a proper twinning kit.
49
(2 pcs.)
(2 pcs.)
98
241
183
83
505
342
588
160
62
49
62
Distributer
Distributer
Pipe cover
(Dot-dashed part)
12.7
12.7
12.7
12.7
Local brazing
Note 2
15.88
15.88
28.58
Note 2
25.4
22.2
25.4
22.2
Pipe cover
(Dot-dashed part)
Local brazing
28.58
(2 pcs.)
22.2
19.05
12.7
15.88
12.7
9.52
28.58
22.2
For Gas pipe:
For Liquid pipe:
ID: Inner Diameter
OD: Outer Diameter
mm
CMY-Y100VBK3
<Deformed pipe(Accessory)>
For Gas pipe:
For Liquid pipe:
ID: Inner Diameter
OD: Outer Diameter
mm
CMY-Y200VBK2
<Deformed pipe(Accessory)>
(2 pcs.)
49
15.88
12.7
41.28
34.93
69
Local brazing
Pipe cover
15.88
19.05
15.88
15.88
19.05
15.88
Note 2
191
244
85
11
5
Distributer
(Dot-dashed part)
28.58
28.58
28.58
28.58
31.75
Local brazing
(Dot-dashed part)
Pipe cover
162
585
337
Note 2
34.93
Distributer
503
The angle of the branch pipe is within against the horizontal plane.
2. Use the attached pipe to braze the port-opening of the distributer.
3. Pipe diameter is indicated by inside diameter.
Note 1. Reference the attitude angle of the branch pipe below the fig.
Distributer
15
15
0000003810.BOOK 82 ページ ２０１５年１１月９日 月曜日 午前１１時１２分
