Mitsubishi Electric PFD-P250VM-E, Service Handbook

Page: 264 / 326

[8-12 Parts Replacement Instructions ]
BS_08_C chapter 8 -
65
8 Troub
le
sho
o
ting Bas
e
d on Ob
ser
ved
Sy
mp
toms
(14) To remove the front heat exchanger, first remove the front, left, and right frames by unscrewing the 10 screws. (See Figure
11.)
To remove the rear heat exchanger, remove the rear frame in addition to the front, left, and the right frames by unscrewing
the 12 screws. (See Figure 11.)
(15) Unscrew the two screws each on the right and left panels. (See Figure 12 Right and Left.)
(16) Remove the left front pillar by unscrewing the 9 screws on a standard model or 10 screws on a high-efficiency model.
(See Figure 12 Front and Left.)
(17) Remove the right front pillar by unscrewing the 5 screws. (See Figure 12 Front and Right.)
*Use the supplied spacers. Use the spacers 60 (D) X 250 (W) X 60 (H) when replacing the heat exchangers for the maintenance of the
accumulator and the pipes.
Right frame
Front frame
Left frame
Left front pillar
Right front pillar
Left panel
Right panel
Spacer *
Figure 12 Front Figure 12 Left Figure 12 Right
Figure 11
Rear frame
Connection of the pillar to the rear heat
exchanger (4 screws on a standard model
or 5 screws on a high-efficiency model)
0000004498.BOOK 65 ページ ２０１８年１月５日 金曜日 午前１０時３８分