Mitsubishi Electric NZ2MFB1-32D, User Manual

Page: 110 / 126

108
APPX
Appendix 6 EMC and Low Voltage Directives
Appendix 6
EMC and Low Voltage Directives
Compliance with the EMC Directive, which is one of the EU directives, has been mandatory for products sold within EU
member states since 1996 as well as compliance with the Low Voltage Directive since 1997. For products compliant to the
EMC and Low Voltage Directives, their manufacturers are required to declare compliance and affix the CE marking.
Sales representative in EU member states
The sales representative in EU member states is:
Company: MITSUBISHI ELECTRIC EUROPE B.V.
Address: Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany
Measures to comply with the EMC Directive
The EMC Directive sets requirements for emission (conducted and radiated electromagnetic interference emitted by a
product) and immunity (the ability of a product not to be influenced by externally generated electromagnetic interference).
This section describes the precautions for machinery constructed with the modules to comply with the EMC Directive.
These precautions are based on the requirements of the EMC Directive and the harmonized standards. However, they do not
guarantee that the entire machinery constructed according to the descriptions complies with the EMC Directive.
The manufacturer of the machinery must determine the testing method for compliance and declare conformity to the EMC
Directive.