Mitsubishi Electric NZ2GN2B1-32D, User Manual

Page: 241 / 268

APPX
Appendix 2 Remote Register
239
A
Module operation area
■
Device number
■ Description
This area is intended for module operation.
■ Error clear request flag (RWw0.b10)
Turning on Error clear request flag (RWw0.b10) after eliminating the cause of the error changes the error code (RWr1) to 0.
Some error cannot be cleared with Error clear request flag (RWw0.b10) depending on its details.
• Operation in the event of a minor error
• Operation in the event of a moderate error
Name Device number
Module operation area RWw0
RWw0 Name
b0 to b9 Use prohibited
b10 Error clear request flag
b11 to b15 Use prohibited
Performed by I/O module
Executed by the program
(1) Use the bit for the target station in SW0110 to SW0117 (individual station CPU minor error status) of the master station.
Performed by I/O module
Executed by the program
(1) Use the bit for the target station in SW0100 to SW0107 (individual station CPU moderate error status) of the master station.
0000H 0000H
ON
ON
OFF
OFF OFF
OFF
CPU minor error status of
each station (1)
Error code
(RWr1)
(Error code)
Error clear request flag
(RWw0.b10)
I/O control status
Control performed
0000H 0000H
ON
ON
OFF
OFF OFF
OFF
CPU moderate/major error
status of each station (1)
Error code
(RWr1)
(Error code)
Error clear request flag
(RWw0.b10)
I/O control status Control stopped
Control
performed
Control performed