Simple Remote Controller User Guide
【
MSZ-FH series
】
1
2
3
Press
to start the operation.
Press
or
to set the temperature.
Each press raises or lowers the temperature by 1°C.
Press
to select operation mode. Each press
changes mode in the following order:
)
N
A
F
(
)
T
A
E
H
(
)
Y
R
D
(
)
L
O
O
C
(
)
O
T
U
A
(
SELECTING OPERATION MODES
PREPARATION BEFORE OPERATION (SETTING CURRENT TIME)
Note:
In the case of systems with multiple units (multi-systems), it is not
possible to set different operation modes for each unit. In addition,
in some cases, it may not be possible to use certain functions.
Press these buttons to toggle these functions on/off.
The remote controller has a simple,
stylish design with emphasis on
the use of straight lines. The unit
c a n b e t u r n e d o n / o f f a n d t h e
temperature adjusted with the
cover closed.
3
Press the DAY
button to set the
day.
4
Press CLOCK
again.
2
Press the TIME
button to set the
time.
1
Press CLOCK
button.
Setting preferences can be saved and then activated in
future uses simply by pressing the pressing the i-save button.
In normal heating mode, the lowest possible temperature setting is
16°C, but using i-save, this value can be set as low as 10°C.
i-save
Air conditioner operates at maximum capacity for 15 minutes.
POWERFUL
A swing pattern is used for airflow to create an enhanced
cooling sensation. This allows the temperature to be set 2°C
higher without any loss of comfort.
ECONO COOL
A
B
(AUTO) (Silent) (Low) (Med.) (High) (Super High)
Press
to select air
fl
ow direction.
Each press changes air
fl
ow direction in the following order:
(AUTO) (1) (2) (3) (4) (5) (SWING)
Press
to select horizontal air
fl
ow direction.
(SWING)
Heating (or Cooling) of two locations using
the double vane
▲
C
FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT
FAN
WIDE VANE
L-VANE-R
Each press changes air
fl
ow direction
in the following order:
Press
to select fan speed.
Each press changes fan speed
in the following order:
TIMER OPERATION
Press
or
during operation to set the timer.
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
*
or
blinks.
* Make sure that the current time and day are set correctly.
1
Press
(Increase) and
(Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
•
Set the timer while
or
is blinking.
2
1
Press
to enter the weekly timer setting mode.
2
Press
and
to select setting day and number
.
3
Press
,
, and
to set ON/OFF, time, and temperature.
4
Press
to complete and transmit the weekly timer setting.
5
Press
to turn the weekly timer ON. (
lights.)
* When the weekly timer is ON, the day of the week whose timer setting is complete, will light.
Press
again to turn the weekly timer OFF. (
goes out.)
0
：
30
7
：
30
8
：
30
8
：
00
23
：
30
Wake up
Go to bed
Timer OFF.
Timer ON.
Temp. setting: 27°C
Change temp.
Temp. setting: 28°C
Press
or
again to cancel timer.
3
F
ON/OFF TIMER
WEEKLY TIMER
A
B
E
C
D
F
G
What is “NATURAL FLOW”?
Press this button to toggle the function on/off.
Press this button to toggle the function on/off.
What is “Air Purifying”?
D
E
i-see OPERATION
3
Press
i-see control mode.
again to release
1
Press
during COOL, DRY,
HEAT and AUTO mode to
activate i-see control mode.
•
Press gently using a thin instrument.
•
lights. (Operation display section)
•
The default setting is “active”.
i-see control mode
ABSENCE DETECTION
SENSOR
To avoid overcooling
Air
Virus
Bacteria
Dust
Air
Neutralization/Sterilization
Plasma
space
2
Press
ABSENCE DETECTION.
again to activate
•
lights. (Operation display section)
INDIRECT/DIRECT
Press
to activate INDIRECT/DIRECT
i-see control mode is effective.
mode. This mode is only available when the
(INDIRECT)
(DIRECT)
(OFF)
G
CONVENIENT ONE-TOUCH FUNCTIONS
As time passes, air
fl
ow will become more
like natural wind. The continuously gentle
breeze provides enhanced comfort for
occupants.
The purifier neutralizes bacteria as it
passes through the plasma device.
The sensor detects
the floor temperature….
When no-one is in the room,
the unit automatically switches to
energy-saving mode.
Enhance comfort by averting airflow away from
people, or set direct airflow to target people for quick
cooling/heating.
The unit monitors people……
To warm from the
foot-level up
10 minutes after
person leaves room
Allowing
indirect airflow
60 minutes after
person leaves room
5 校
【海外】カンタンリモコン操作マニュアル 297mm×420mm
2012.8.8
