background image

MR-508EK, MR-508EKL,
MR-560EK, MR-560EKL

SERIES MODEL

OPERATING INSTRUCTIONS

Non-Freon Refrigerators

This refrigerator uses non-Freon refrigerant (isobutane) and non-Freon foam insulation (cyclopentane).
These materials are harmless to the environment and do not affect the ozone layer and global warming.

Please read this manual carefully and follow the information contained within. In particular, be sure to read the safety precautions before using this refrigerator.
Be sure to receive your copy of the warranty from the retailer and confirm that the purchase date and retailer name are written on the warranty.
Store this operating instructions manual and the warranty in a safe place.

This refrigerator was manufactured for refrigerating and freezing of foods in general households. For commercial use, please use a commercial refrigerator-freezer.
The principal plastic components indicate the material name to facilitate recycling.

It is strongly recommended to use only lukewarm water and a soft cloth when cleaning.

Cleaning agents can cause cracking to the plastic components of your refrigerator.

Cleaning Instruction - Important!

Summary of Contents for MR-508EK Series













Reviews: