Mitsubishi Electric MELSEC Q80BD-J71GF11-T2, User Manual

Page: 136 / 248

134
13 DIAGNOSING BOARD STATUS
13.2 Diagnosing CC-Link IE Field Network
Reserved station function enable
Cancel slave stations temporarily and reserve the slave station again.
This function cannot be performed when the connected station is a local station.
Window
[Diagnostics]  [CC IE Field Diagnostics]  "CC IE Field Diagnostics" screen  [Reserved Station Function Enable]
button
Operating procedure
1.
Select reserved stations to be canceled temporarily or reserved again from "Reserved Station List".
2.
Click the [OK] button.
The selected reserved stations are canceled temporarily or reserved again.
When the process is completed, the contents of "Reserved Station List" are updated.
• Parameter setting
The network parameter does not reflect the temporary cancellation of reserved station specification.
• Resetting master station or turning OFF the system
The temporary cancellation of reserved station specification is reset and the slave station returns to the
status set by the master station's network parameter.
• Disconnecting a station for which reservation has been temporarily cancelled
If the master station is reset, the master station and local stations will differ in the following:
ERR. LED status
Data in Reserved station specification (SW00C0 to SW00C7) and Reserved station function disable status
(SW0180 to SW0187)
The difference can be corrected by the following procedure.
1. Reconnect the disconnected station.
2. Temporarily cancel the reservation and then reserve the station again.