Mitsubishi Electric MELSEC iQ-R-R00CPU, User Manual

Page: 105 / 1028

3 MEMORY CONFIGURATION OF THE CPU MODULE
3.4 Files
103
3
*1 mmm represents the start I/O number (first three digits in four-digit hexadecimal representation) of each module. For the CPU module, it
will be 3FFH. Also, nn represents the serial number (two-digit hexadecimal representation) of module extension parameter files or
module-specific backup parameter files of each module.
*2 nn corresponds to the setting number and is 01 through 10.
*3 Can be stored but cannot operate as a function.
*4 When this file is stored in the built-in memory of the CPU module, it is divided into program memory and data memory and stored. (

Page 106 Configuration of a program file)
*5 The module extension parameter for the protocol setting is a file for storing protocol setting information in the predefined protocol
support function.
*6 The module-specific backup parameter is a file for storing the save or restore data of the module to be replaced by the online module
change function. For details, refer to the manual for the module used.
*7 This file name depends on the connection type of the iQ Sensor Solution data backup/restoration function. For the file name, refer to the
following.
 iQ Sensor Solution Reference Manual
*8 The parameter cannot be written to the CPU modules on other stations via MELSECNET/H of the Q series.