manualshive.com logo in svg

Mitsubishi Electric MELIPC MI5000 Series, User Manual

Share
Download
Mitsubishi Electric MELIPC MI5000 Series User Manual Download Page 126

124

8  DIAGNOSTIC AND MAINTENANCE FUNCTIONS
8.9  Individual Reset Function

Advance processing during a forced restart

VxWorks part processing that was registered by the user in advance can be executed before the Windows part is forced to 
restart.
Advance processing is registered using the C Controller module dedicated function (CCPU_EntryWinResetFunc).

■

Function list

For details on the C Controller module dedicated functions, refer to the following manual.

MELIPC MI5000 Series Programming Manual (VxWorks)

Precautions

■

Windows part forced restart permission

Excluding forced restarts from a switch operation, it is necessary to allow forced restarts of the Windows part using MI 
Configurator.

[Basic Parameters] 

 [Operation Related Settings] 

 [Remote Reset Setting] 

 [Windows part forced restart]

■

Considerations before forcing a restart of the Windows part

If Windows is forced to restart during operation of a user program, the files of the Windows part may be corrupted. Before 
forcing a reset of the Windows part, always take measures to prevent file corruption, such as stopping user programs. 
Furthermore, enable the Unified Write Filter of this product to protect the Windows part system files. (

MELIPC MI5000 

Series User's Manual (Startup))

■

Considerations after forcing a restart of the Windows part

If the Windows part was forced to restart, the shared memory of the OS linking function is not in the same status as when the 
power supply of this product is turned OFF and ON. To clear the shared memory, turn the power supply of this product OFF 
and ON or reset this product.

■

When user programs of the VxWorks part and Windows part are linked

When user programs of the Windows part and VxWorks part are linked using virtual Ethernet or shared memory, user 
applications of the VxWorks part may be affected if the Windows part is forced to restart. Therefore, stop linked processing 
and take other measures to ensure that the user applications of the VxWorks part are not affected by a forced restart of the 
Windows part.

■

Considerations after running the shutdown function

The Windows forced-restart function cannot be run when the shutdown function has set this product in a state in which the 
power supply can be turned OFF. Switch the power supply of this product OFF to ON.

■

Functions that cannot be used for advance processing of Windows part forced-restart

Do not use the following functions for advance processing of the Windows part forced-restart registered by the user. The 
Windows part forced-restart may not be completed.
 • CCPU_MELIPCShutdown
 • CCPU_WinReset
If user processing that uses the above-mentioned functions was registered, and a Windows part forced-restart was run, switch 
the power supply of this product OFF and ON, and then change the registered processing.

Function name

Description

CCPU_EntryWinResetFunc

Registers a routine to be called before the Windows forced-restart function of the individual reset function is executed.

Summary of Contents for MELIPC MI5000 Series

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands