Installation and operation manual
KSGD02 Revision: 1.4
Page 4 of 16
R
KSGD-01WS-B
!
!
Safety Precautions
Definition of symbols
Alert
Symbol
Description
Danger
!
Will result in death or serious injury if not avoided.
Warning
!
Could potentially result in death of serious injury if not avoided.
Caution
!
Could potentially result in damage to the product, injury or damage to the
environment if not avoided.
Information
i
Information notes relating to the operation of the product.
Warning:
Carefully read the labels affixed to the main unit.
Warning:
Ask the dealer or an authorised technician to install the unit.
Improper installation by the user may result in water leakage, electric shock, or fire.
Use the specified cables for wiring. Make the connections securely so that any outside forces acting on the cables
are not applied to the terminals. Inadequate connection and fastening may generate heat and cause a fire.
Never repair the unit. If the controller must be repaired, consult the dealer.
If the unit is repaired improperly, electric shock, or fire may result.
When handling this product, always wear protective equipment. EG: Gloves, full arm protection namely boiler suit,
and safety glasses.
Improper handling may result in injury.
If refrigerant gas leaks during installation work, ventilate the room.
If the refrigerant gas comes into contact with a flame, poisonous gases will be released.
Install the controller according to this Installation Manual.
If the unit is installed improperly, electric shock, or fire may result.
Have all electric work done by a licensed electrician according to "Electric Facility Engineering Standard", "Interior
Wire Regulations" and the instructions given in this manual and always use a special circuit.
If the power source capacity is inadequate or electric work is performed improperly, electric shock and fire may
result.
Keep the electric parts away from any water -
Contact may result in electric shock, fire or smoke.
After completing installation work, make sure that refrigerant gas is not leaking.
If the refrigerant gas leaks and is exposed to a fan heater, stove, oven, or other heat source, it may generate noxious
gases.
Do not reconstruct or change the settings of the protection devices. If the pressure switch, thermal switch, or other
protection device is shorted or operated forcibly, or parts other than those specified by Mitsubishi Electric are used,
fire or explosion may result.
To dispose of this product, consult your dealer. Do not use a leak detection additive.
