1
Connection settings
Value
Baud Rate
9600 [bps]
Data Bits
8 [bits]
Parity
None
Stop Bits
1 [bit]
Flow Control
None
Emulation settings
Value
Emulation
ANSI
ASCII settings
Value
ASCII sending
Sending line ends with line feeds
Enable
Echo typed characters locally
Enable
Line delay (milliseconds)
400
Character delay (milliseconds)
0
ASCII Receiving
Append line feeds to incoming line ends
Disable
Force incoming data to 7-bit ASCII
Disable
Wrap lines that exceed terminal width
Enable
Controlling the projector using a personal computer
This projector can be controlled by connecting a personal computer with RS-232C terminal.
PC-controllable functions :
• Turning the power ON or OFF
• Changing input signals
• Menu setting
Connection
S-VIDEO
RS-232C
Y
G(Y)
Cb/Pb
Cr/Pr
VIDEO
DVI
B(Cb/Pb)
R(Cr/Pr)
H/HV
V
to RS-232C terminal
to SERIAL port
RS-232C cable
D-SUB 9P
D-SUB 9P
Important:
• Adapters may be necessary depending on the PC connected to this projector. Contact your dealer for details.
• Make sure that your computer and projector are turned off before connection.
• Turn on the personal computer and put the control software in the standby state before turning on the projec-
tor.
• This projector uses RXD, TXD and GND lines for RS-232C control.
• For RS-232C cable, the reverse type cable should be used.
1) Communication setting
HOME THEATER DLP™ PROJECTOR
HC2000
