Mitsubishi Electric GT14, User Manual

Page: 1236 / 1546

52 - 40
52. CONNECTION TO AZBIL CONTROL EQUIPMENT
52.5 Control Equipment Side Setting
52.5.6 Connecting to DMC50

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-D50/SLP-H21)of the
temperature controller.
*1 Adjust the settings with GOT settings.
*2 Set the station address using the rotary switch for the station
address.
*3 Do not set to "0".
*4 Select the station address without overlapping with that of
other units.

Station address setting
Set the station address using the rotary switch for the
station address.
52.5.7 Connecting to SDC45/46

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-C45) of the temperature
controller.
*1 Adjust the settings with GOT settings.
*2 Set to CPL.
*3 Do not set to "0".
*4 Select the station address without overlapping with that of
other units.
*5 When using the interface converter CMC10L, set the com-
munication minimum response time to 3ms or more.
52.5.8 Connecting to CMS, CMF015

Communication settings
Make the communication settings by operating the key
of the control equipment.
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
52.5.9 Connecting to CML, CMF050

Communication settings
Make the communication settings by operating the key
of the control equipment.
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
52.5.10 Connecting to MQV

Communication settings
Make the communication settings by operating the key
of the control equipment.
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
Item Set value
Transmission speed
*1
9600bps, 19200bps, 38400bps
Communication mode CPL
Data bit 8bits (fixed)
Parity bit Even (fixed)
Stop bit 1bit (fixed)
Station address
*2*3*4
0 to F
Item Set value
Transmission speed
*1
9600bps ,19200bps, 38400bps
Communication mode
*2
CPL
Data bit 7bits, 8bits
Parity bit
*1
Even, Odd, None
Stop bit 1bit, 2bits
Communication minimum
response time
*5
1 to 250ms
Station address
*3*4
0 to 120
Rotary switch for the module address
0
12
345
67
89
AB
CDEF
Item Set value
Transmission speed
*1
9600bps
Communication
condition selection
0: 8-bit data length, Even parity, Stop bit 1
1: 8-bit data length, Non parity, Stop bit 2
Station address
*2*3
0 to 99
Item Set value
Transmission speed
*1
9600bps
Communication condition
selection
*1
00: 8-bit data length, Even parity, Stop bit 1
01: 8-bit data length, Non parity, Stop bit 2
Station address
*2*3
0 to 7F
Item Set value
Transmission speed
*1
9600bps ,19200bps, 38400bps
Communication condition
selection
*1
00: 8-bit data length, Even parity, Stop bit 1
01: 8-bit data length, Non parity, Stop bit 2
Station address
*2*3
0 to 127