Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 240 / 310

238
16 GOT SELF CHECK (DEBUG)
16.2 FX List Editor
Operation procedures
This section describes the contents of the MELSEC-FX list editor and the key functions displayed on the screen.
Key arrangement and a list of key functions
The arrangement and functions of the keys displayed on the MELSEC-FX List Editor window are described below.
Displayed contents
No. Item Display contents
1) Channel No Displays the currently selected channel number.
Touching "ChNo." displays the communication setting window.
The communication setting window is not displayed if the MELSEC-FX list editor is started from the FX ladder monitor.
2) Mode Displays a mode for MELSEC-FX list editor.

Page 240 Selection and operation of modes
[Monitor] is displayed when the list monitor is executed.

Page 258 List monitor
3) Error message Displays the contents of errors that occur with the MELSEC-FX list editor.

Page 260 Error messages and corrective actions
4) List display area Displays the sequence program in list format (12 digits).
The position (line) that can be edited is displayed with a bar.
5) Key area Displays the keys that can be used with the MELSEC-FX list editor.
4)
1)
5)
3)
2)