Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Page: 84 / 292

11 - 14
11.3 Ethernet Communication
■ Change of station No.
■ Change of IP address
Step 1.
Touch the station No. to be changed,
and input the station No. of the
destination Ethernet module to be
changed by the numeric keypad
displayed.
Step 2.
After the setting change, touch the [×]
key. When the screen shown on the left
appears, touch the [YES] key.
Step 1.
Touch the IP address to be changed,
input the destination IP address to be
changed by the numeric keypad
displayed.
Step 2.
After the setting change, touch the [×]
key. When the screen shown on the left
appears, touch the [YES] key.
Touch YES.
Touch YES.