Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Page: 264 / 292

19 - 2
19.2 Prior Preparations for Installing Boot OS and System Application
19.2 Prior Preparations for Installing Boot OS and System Application
For the installation using GOT, the data storage that is storing Boot OS or the system application is required.
There are the following three methods for the installation of Boot OS and system application.
(1) [To Memory Card] from GT Designer3
➠ GT Designer3 (GOT2000) Help
(2) Uploading from another GOT (the package data has been installed)
➠
18. BootOS and System Application Installation Using Data Storage
(3) Using an SD card that stores data with OS boot drive set to A drive
➠ GT Designer3 (GOT2000) Help
POINT POINT POINT
Precautions when installing Boot OS and the package data into an SD card
When installing Boot OS and the package data into the SD card, be sure to execute by the utility
of another GOT or GT Designer3.
The installation is not executed properly with the SD card to which data is uploaded from the
utility of GOT or copied by software other than GT Designer3.
Note the available capacity of the SD card.
The available capacity of Boot OS and system applications can be confirmed by [To Memory
Card] or [Write Option] of GT Designer3.
Write Option
Available space of the data
Available space of the system application