Mitsubishi Electric GOT SIMPLE GS2107-WTBD User Manual Download Page 198

Page: 198 / 292

15 - 52

15.8 BACKUP/RESTORE

■2.

How to use password for backup/restore

(1) Backup

The following shows the operating procedure for the backup after setting the password for the backup/restore.

➠

15.8.6 Operation of backup/restore

Start

Touch [Backup] in the main menu on the GOT.
(The second or later backup)

Input the password for the backup/restore.

The passwords for the controller stored as the
backup setting data are automatically verified
for each file.

The file is backed up.

Input the correct password
for the controller.

Backup completed

Yes(Other than the FXCPU)

Yes

Is a password set for the
file to be backed up?

Is there another unit?
(In the multiple CPU system)

Yes

Is there another controller to
be backed up?
(when with controller list file)

Have the passwords for the
controllers ever been changed?

Is the password correct?

Is there another file?

Set the password for the backup/restore.
(Set 32 or less alphanumeric characters for
the password.)

Yes(FXCPU)

When a keyword is set,
disable the keyword.

➠

15.8.6 Operation of backup/restore

Summary of Contents for GOT SIMPLE GS2107-WTBD





































































































































































































































































































Search results

Summary of Contents for GOT SIMPLE GS2107-WTBD

Reviews:

Related manuals for GOT SIMPLE GS2107-WTBD

Brands by name

Popular brands

Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Search results

Summary of Contents for GOT SIMPLE GS2107-WTBD

Reviews:

Related manuals for GOT SIMPLE GS2107-WTBD

Brands by name

Popular brands